This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

With the XD600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 ë©, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 ë© for your front satellites and 75 W x 2 @ 4 ë© for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.

The XD600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

Features:

• Description: 400W 2/3/4 Channel Amplifier
• Inputs: Two Stereo Pairs
• On-Board Crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-500 Hz. Configurable as Low-Pass or High-Pass. Defeatable.
• Speaker Output Connections: Accept up to 12 AWG wire
• +12V and Ground Connections: Accept up to 4 AWG wire

Specifications:

• Rated Power 14.4 V Stereo: 75W RMS x 4 @ 4 ohms 100W RMS x 4 @ 2 ohms
• Rated Power 14.4 V Bridged: 150W RMS x 2 @ 8 ohms 200W RMS x 2 @ 4 ohms
• Rated Power 12.5 V Stereo: 60W RMS x 4 @ 4 ohms 90W RMS x 4 @ 2 ohms
• Rated Power 12.5 V Bridged: 120W RMS x 2 @ 8 ohms 180W RMS x 2 @ 4 ohms
• THD At Rated Power:<1% THD+Noise (20Hz - 20 kHz)
• S/N Ratio:>104 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth)>84 dB referred to 1W (A-weighted, 20 Hz-20 kHz noise bandwidth)
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Damping Factor:>150 @ 4 ohms per ch./ 50 Hz>75 @ 2 ohms per ch. / 50 Hz
• Input Range: 100mV - 4V RMS

Approximate Dimensions: